engenius EWS300AP
Technical specification
IEEE 802.11b/g/n on 2.4GHz
IEEE 802.3af Power-over-Ethernet
Radio I: 11b/g/n: 2.412-2.472 GHz
Antenna
Two (2) 5dBi 2.4GHz Internal high
gain antennas
Physical interface
1* 10/100/1000 Gigabit Ethernet port
1* DC Power connector
1* Reset button
Physical security
Kensington security slot
LED indicators
1* Power
1* WLAN (Wireless connection)
1* LAN
Power source DC
Input: 12VDC/1A
PoE: Compatible with 802.3af
Mounting
Ceiling or wall mount
Memory capacity
Memory: 128 MB
Flash memory: 16 MB
Wireless & radio specifications
Single band
Operation modes
Access point
Transmit power
Up to 29dBm on 2.4GHz
Max transmit power is limited by regulatory
power
Radio chains/Spatial streams
2x2: 2
Supported data rates (Mbps)
2.4GHz: Max 300
802.11b: 1, 2, 5.5, 11
802.11g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
Supported radio technology
802.11b: Direct-Sequence Spread-Spectrum
(DSSS)
802.11g/n: Orthogonal frequency-division
Multiplexing (OFDM)
Channelization
802.11n with 20/40 MHz channel width
802.11b/g with 20 MHz channel width
Supported modulation
802.11b: BPSK, QPSK, CCK
802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM
Management Multiple BSSID
Supports up to 8 SSIDs
VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging
VLAN Pass through
Wireless client list
Independent VLAN settings can be enabled or
disabled
Any packet without a VLAN tag will be inserted
into a PVID (Ethernet port VID)
Client traffic status
Spanning tree
Supports 802.1d spanning tree protocol
QoS
IEEE 802.11e/WMM
SNMP
v1, v2c, v3
MIB
I/II, private MIB
